1. Cisco Crypto Key Gen Rsa
2. Asa Crypto Key Generate Rsa
3. Crypto Key Generate Rsa 2048
4. Cisco Asa Create Rsa Key
5. Cisco Asa Crypto Key Generate Rsa Free
6. Crypto Key Generate Rsa Command

Q: Windows server 2008 product key generator. I have a Cisco switch in my network, which I can access by hooking up a console cable directly to the device. I like to access the switch remotely using SSH. How can I enable ssh on my Cisco 3750 Catalyst Switch?
A: By default, when you configure a Cisco device, you have to use the console cable and connect directly to the system to access it. Follow the steps mentioned below, which will enable SSH access to your Cisco devices. Once you enable SSH, you can access it remotely using PuTTY or any other SSH client.

1. Setup Management IP

First, make sure you have performed basic network configurations on your switch. For example, assign default gateway, assign management ip-address, etc. If this is already done, skip to the next step.

In the following example, the management ip address is set as 192.168.101.2 in the 101 VLAN. The default gateway points to the firewall, which is 192.168.101.1

2. Set hostname and domain-name

Next, make sure the switch has a hostname and domain-name set properly.

Because SSH uses RSA public keys to encrypt the sessions, you need to have consistent timing information. Example 3-16 shows not only how to manually adjust and verify timing information, but also how to create a domain name and generate RSA keys. Example 3-17 shows how to visualize SSH-related information in the Running-config. Show crypto key mypubkey rsa: Shows information about the SSL certificate If you’d like to learn more about on how to configure SSH on a Cisco router I recommend you read through this documentation: Configuring Secure Shell on Routers and Switches Running Cisco IOS.

3. Generate the RSA Keys

The switch or router should have RSA keys that it will use during the SSH process. So, generate these using crypto command as shown below.

Also, if you are running on an older Cisco IOS image, it is highly recommended that you upgrade to latest Cisco IOS.

4. Setup the Line VTY configurations

Cisco Crypto Key Gen Rsa

Setup the following line vty configuration parameters, where input transport is set to SSH. Set the login to local, and password to 7.

If you have not set the console line yet, set it to the following values.

5. Create the username password

If you don’t have an username created already, do it as shown below.

Asa Crypto Key Generate Rsa

Note: If you don’t have the enable password setup properly, do it now.

Make sure the password-encryption service is turned-on, which will encrypt the password, and when you do “sh run”, you’ll seee only the encrypted password and not clear-text password.

5. Verify SSH access

From the switch, if you do ‘sh ip ssh’, it will confirm that the SSH is enabled on this cisco device.

After the above configurations, login from a remote machine to verify that you can ssh to this cisco switch.

In this example, 192.168.101.2 is the management ip-address of the switch.

If you enjoyed this article, you might also like.

Crypto Key Generate Rsa 2048

Cisco Asa Create Rsa Key

Next post: How to Backup Oracle Database using RMAN (with Examples)

Cisco Asa Crypto Key Generate Rsa Free

Crypto Key Generate Rsa Command

Previous post: How to Use C++ Single and Multiple Inheritance with an Example